Chapter 5 Setup
119
Item
Setting
*1
Details
Type Normal/Soft/
Hard
Sets the cleaning type for head cleaning.
Cleaning Check ON/OFF Sets whether nozzle checking is performed after head cleaning is
completed.
Interval Wiping OFF/3 to 255
min
Wiping starts when the set print time is exceeded.
Refresh Weak/
Standard/
Strong
Select the refresh (flushing) time during printing.
Waste Ink Tank - Resets or corrects the waste ink tank usage count. "Waste Ink
Tank Replacement"(P. 158)
Reset Waste Ink
Volume
- Resets the waste ink tank usage count. "Waste Ink Tank
Replacement"(P. 158)
Adjust Waste Ink
Volume
- Corrects the waste ink tank usage count. "When "Check Waste
Ink Tank" message appears"(P. 159)
Tank Capacity - Displays the waste ink tank capacity.
Orange Maintenance - Prevents ink sedimentation inside the ink paths.
• Use this when uneven color occurs for the orange ink.
*1. The default settings are shown underlined.
*2. Displayed only when an optional NCU is installed.
5
To Next Page
Loading...
