MIMAKI CJV200-160 - DAS (Automatic Correction Function); Sheet Width Sensor Cleaning

Chapter 6 Maintenance
143
• Insert the cleaning stick as far as the line shown in the illustration.
5
Once cleaning is complete, close the cover, then press the [ENTER] key.
DAS (automatic correction function) / Sheet width sensor cleaning
The DAS sensor is located on the carriage underside. If dust or debris accumulates on the sensor, DAS
(Media Setting Menu) may not function.
1
Remove the maintenance cover (upper left side).
Maintenance cover (upper left side)
2
On the LOCAL mode screen, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
3
Select [Station Maint.] > [Carriage Out] > [Move To Maint. Space], then press the [ENTER] key.
• The carriage moves to the maintenance space.
4
Open the maintenance cover (left).
6