Chapter 6 Maintenance
151
Wiper Replacement
The machine maintains a count of the number of wiping cycles. The "Replace Wiper" message appears
when a preset count is reached. Replace dirty or warped wipers with new ones.
1
"Replace Wiper" appears on the display.
2
On the LOCAL mode screen, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
3
Select [Station Maint.] > [Replace Wiper], then press the [ENTER] key.
• The carriage moves over the platen.
4
Open the maintenance cover (right side).
5
Remove the wiper.
• Hold the lugs on both sides of the wiper bracket, then pull out the wiper.
6
Clean the wiper slider.
• Wipe off any ink and dust adhering using a cleaning stick moistened with maintenance liquid. Wipe
off the maintenance liquid. Make sure none remains.
6
To Next Page
Loading...
