MIMAKI CJV200-160 - Part Names and Functions; Front

Chapter 1 Before Use
22
1.1 Part Names and Functions
Front
1
2
3
6
5
7
8
9
10
4
11
12
13
No. Name Overview
1 Platen Print area. "Platen"(P. 24)
The platen is fitted with a heater to prevent ink bleeding. Adjust the
temperature setting to suit the type of media used. "Setting the Heater
Temperature"(P. 70)
2 Pinch roller
Grit roller
The pinch rollers and grit rollers are used to grip and feed the media.
"Pinch Rollers and Grit Rollers"(P. 25)
3 Cutter unit
(only equipped on CJV)
Holds a cutter and a pen for cutting. "Cutting"(P. 85) "Cutting Data
with Register Marks"(P. 101)
4 Carriage Consists of a print head, the jam sensor, and the media cutter.
"Carriage"(P. 24)
5 Maintenance cover
(right side)
Open the cover to perform maintenance on the station, etc. Printing and
automatic maintenance are not possible while the covers are open.
6 Operating Panel Includes operating keys and displays indicating various settings and other
items. "Operating Panel"(P. 27)
7 Station Includes caps for protecting the print head, wipers, and an NCU (option) for
monitoring print head nozzle conditions. "Station"(P. 24)
8 Clamp lever Lowering the clamp lever secures the media. Raising the clamp lever
releases the media. Linked to the clamp lever at the rear.
9 Waste Ink Tank Contains the container for waste ink. "Waste Ink Tank
Replacement"(P. 158)
10 Take-up unit Rolls up the printed roll media. "Take-up unit"(P. 55)
11 Post-heater Allows ink to dry after printing. Adjust the temperature setting to suit the type
of media used. "Setting the Heater Temperature"(P. 70)
12 Maintenance cover (left
side)
Open the cover to perform maintenance on locations such as the carriage
underside. Keep the cover closed, except during maintenance.
13 Maintenance cover (No.
12 upper side)
Open the cover to perform maintenance on locations such as the carriage
underside. Keep the cover closed, except during maintenance.