MIMAKI CJV200-160 - Installing the Mimaki Driver; Installing RIP Software; Obtaining Color Profiles; Setting up RIP Software

Chapter 1 Before Use
36
Installing the Mimaki Driver
1
Download the Mimaki driver from our website.
• https://mimaki.com/download/inkjet.html
[(Example: CJV200-160)] > [Driver/Utility]
2
Install the MIMAKI driver.
Installing RIP Software
The explanation here applies to MIMAKI RIP software (RasterLink).
1
Install RasterLink.
• The following icon appears on the PC desktop once the software has been installed.
• For more information, refer to the RasterLink installation guide. https://mimaki.com/download/
software.html
• Once installed, activate the license for Rasterlink. Otherwise, "Profile Update" will not start.
Obtaining Color Profiles
Print quality (e.g., tone, bleeding) will vary depending on the media and ink set. To maintain consistent print
quality, select a color profile that suits the media and ink set.
• The RasterLink Series includes a function allowing color profiles to be downloaded and installed directly
from the Internet. For more information, refer to "Installing Profiles" in the RasterLink Series installation
guide.
https://mimaki.com/download/software.html
[RasterLink Series used] > [Manuals]
• Color profiles for Mimaki RIP software (RasterLink) are available on the Mimaki website.
https://mimaki.com/download/inkjet.html
[(Example: CJV200-160)] > [Profile]
Setting Up RIP Software
The explanation here applies to MIMAKI RIP software (RasterLink).
1
Launch RasterLink.
• The [Printer Management] screen appears.
• To add a new model, launch RasterLink, then select [Environment] > [Printer Management].