Chapter 1 Before Use
38
1.5 Ink Replacement Method
When Using 440 ml Ink Cartridge
When Ink Near End is Displayed
Ink levels are low. We recommend replacing with new ink as soon as possible, because the ink packs are
nearly empty. Printing is still possible but continuous printing is not, and some maintenance functions such
as cleaning are disabled. Note that ink may run out during printing.
To check which color ink needs to be replaced, press the [ENTER] key on the LOCAL mode screen.
"Displaying Machine Information (Local Guidance)"(P. 29)
When Ink End is Displayed
The ink has run out. Replace with new ink.
Thoroughly read the following and make sure you understand its contents.
"Notes on Handling Ink or any Other Liquid Used with the Machine"(P. 13)
• Pay close attention to ventilation and be sure to wear safety glasses, gloves, and a mask when
handling ink, maintenance liquid, waste ink, or other solutions used with the machine. Leaking
ink may adhere to the skin or get into the eyes or mouth.
To Next Page
Loading...
