MIMAKI CJV200-160 - When Using 600 Ml Ink Cartridge

Chapter 1 Before Use
39
When Using 600 ml Ink Cartridge
When Ink Level Low or Ink Near End is Displayed
The ink consumption is monitored, and a warning message is displayed accordingly. Discrepancies may
sometimes occur between the actual ink consumption due to various factors, but if a warning message
appears, follow the instructions on the operating panel screen.
• When using a 4-color ink set, do not continue printing if both ink packs of the same color are
running low.
Message
Display criteria
*1
Printer operation Corrective action
Print Cleaning
Ink Level Low • The ink level in the 600 ml
ink cartridge is less than
60 ml.
Possible
*2
Possible
*4
1. Remove the ink cartridge and
weigh it. "Correct the ink
cartridge weight"(P. 126)
2. Enter the measured weight
into the machine. "Correct
the ink cartridge
weight"(P. 126)
INK NEAR-END • The ink level after
cartridge weight correction
( "Correct the ink
cartridge weight"(P. 126))
is less than 60 ml.
Possible
*2
Possible
*4
Ink Level End • The ink level in the 600 ml
ink cartridge is less than
25 ml.
Not
possible
*3
Not
possible
1. Remove the ink cartridge and
weigh it. "Correct the ink
cartridge weight"(P. 126)
2. Enter the measured weight
into the machine. "Correct
the ink cartridge
weight"(P. 126)
Replace Ink pack
(Ink End)
• The ink level after
cartridge weight correction
( "Correct the ink
cartridge weight"(P. 126))
is less than 30 ml.
Not
possible
Not
possible
1. Replace the ink pack.
"Replacing Ink"(P. 40)
*1. The remaining ink values are guideline figures.
*2. Continuous printing is not possible. However, when using a 4-color ink set, continuous printing is possible,
provided no warning has occurred for the other ink cartridge.
*3. When using a 4-color ink set, the supply switches to the other ink cartridge.
*4. Cleaning is possible provided the remaining ink level is at least 25 ml. Cleaning is not possible if the
remaining ink level is less than 25 ml.
1