Chapter 1 Before Use
40
When Ink End is Displayed
The ink has run out. Replace with new ink.
Thoroughly read the following and make sure you understand its contents.
"Notes on Handling Ink or any Other Liquid Used with the Machine"(P. 13)
• Pay close attention to ventilation and be sure to wear safety glasses, gloves, and a mask when
handling ink, maintenance liquid, waste ink, or other solutions used with the machine. Leaking
ink may adhere to the skin or get into the eyes or mouth.
Replacing Ink
• When replacing with a new 600 ml ink cartridge case, record the case weight ( "Correct the
ink cartridge weight"(P. 126)). The weight does not need to be recorded when using a 440 ml
ink cartridge case.
• The cartridge weight does not need to be entered ( "Correct the ink cartridge
weight"(P. 126)) when only the ink pack is replaced.
l
Remove the Ink pack
1
Remove the ink cartridge.
l
Replace the ink pack
• When using a 600 ml ink cartridge, install the ink pack in accordance with Steps 1 to 8 below.
• When using a 440 ml ink cartridge, the ink pack does not need to be installed in the cartridge
case. Proceed to Step 9.
1
Press the case tab with a finger to open the lid.
2
Remove the used ink pack
To Next Page
Loading...
