Chapter 1 Before Use
41
3
Place the new ink pack inside the ink cartridge case.
• Push the ink pack connector into the ink cartridge case slot with the double-sided tape attached
side facing down. Ink may not be supplied if the connector is out of position.
4
Adjust the shape of the ink pack.
5
Remove the seal of the double-sided tape.
6
Secure the ink pack so that it will not become loose.
Misaligned corners of ink
pack and the case
Skewed ink packCorners of ink pack and the case
are aligned
Good example Bad example
7
Close the case lid.
• Push in until the tab clicks.
• Be careful to avoid catching your hands or fingers.
1
To Next Page
Loading...
