MIMAKI CJV30-60BS - Switch Setting of Ink Supply Path

3-50
Switch Setting of Ink Supply Path
For the ink supply, condition of the ink cartridge to be used first by the double-cartridge automatic switching
function can be selected.
1
Press the key in LOCAL to select the
printing mode.
2
Press the key.
3
Select [MACHINE SETUP] by pressing the
keys.
4
Press the key.
5
Select [CART.PRIORITY] by pressing the
keys.
6
Press the key.
7
Select the condition of ink to be used first by pressing
the keys.
INK LEVEL : Low ink cartridge is used first
EXP. DATE : Close-to-date ink cartridge is used first
8
Press the key.
9
Press the key several times to end.
• When expired ink cartridge is set, the expired cartridge is used first regardless of the setting below.
• When the optional bulk ink system (MBIS1) is used and the MBIS1 is set in both slots, the setting below
is effective.
• When both an ink cartridge and the bulk ink system (MBIS1) are set in the supply paths of the same
color, see the next page.
<LOCAL . 1> [ #01 ]
WIDTH:****mm
FUNCT I ON
SETUP <ENT>
FUNCT I ON
MACH I NE S E T UP < ENT >
MACH I NE S E T UP
CART . PR I OR I TY <e n t >
CART . PR I OR I TY
SELECT : I NK LEVEL