Maintaining the Capping Station
6-18
5
Press the key.
6
By pressing the keys, set the time length until
the NOZZLE PROTECT is executed.
• Set value:OFF, 1 to 24 hours
7
Press the key.
• “ON Time” setting ends. Following this, set “Interval”.
• “Interval” is set to seven days as default. If changing is not needed,
press the key several times to end the setting.
8
Select [Interval] by pressing the keys.
9
Press the key.
10
Press the keys to set an execution interval
(number of days) of NOZZLE PROTECT.
• Set value:OFF, 1 to 14 days
11
Press the key.
• Press the key several times to end.
• If maintenance washing liquid has not been filled in the machine, the
screen on the right is displayed in the Step 5. Fill maintenance
washing liquid and execute procedures from the Step 1 again.
Au t oNZL . PROTECT
ON T i me =
1 6h
Au t oNZL . PROTECT
ON T i me =
1 2h
Au t oNZL . PROTECT
ON T i me < e n t >
Au t oNZL . PROTECT
Interval <ent>
Au t oNZL . PROTECT i n t v l
ON T i me =
7 d
Au t oNZL . PROTECT i n t v l
ON T i me =
1 0d
MA I N T E NANCE
Au t oNZL . CUSTODY<en t >
** Washing l iquid **
** un-f i l l ing up. **
To Next Page
Loading...
