3-20
Setting Drying Time
The following items for ink drying time are set.
1
Press the key in LOCAL to select the
printing mode.
2
Press the
key
.
3
Press the key.
4
Press to select one of the types (1 to 4) and press the key.
5
Press to select [DRYING TIME].
6
Press the key.
7
Press to set drying time.
Item selection:Select one with .
Time setting:Set time with .
Set Item Set Value Overview
SCAN 0.0 to 19.9 sec
Ink drying time for each scanning is set.
(During bidirectional printing, the machine stops for a certain period of time
specified for each of the outward and return scanning.)
PRINT END 0 to 8 hours
Ink drying time after printing has been complete is set.
(The next printing is not performed until the set drying time passes.)
<LOCAL . 1> [ #01 ]
WIDTH:****mm
FUNCT I ON
SETUP <ENT>
SETUP
SELECT : TYPE . 1
[1]
DRY I NG T I ME < e n t >
SCAN : PR I NT END
0 . 0s : 0h00m00s
SCAN : PR I NT END
0 . 0s : 0h00m00s
Scanning:
0.0 to 19.9 sec
After printing:
0 to 8 hours
To Next Page
Loading...
