MIMAKI CJV300-130 - Rear and Right Side Machine Components

© 2014 MIMAKI ENGINEERING CO.,LTD. 4.5 P.13R.1.0
1
2
3
4
5
6
7
INSTALLATION GUIDE > Printer Assembly > Storage of packing components
Model
CJV300
Issue
2014.09.01
Revised F/W ver. 1.30 Remark
1.0
Rev.
4.5 Storage of packing components
 Work procedures
1. Attach the metal sheet for packing and the rubber feet on the
back surface of main unit with the screws (P4x20 SMW x 4).
2. Attach the stay 1 on the back surface of main unit with the
screws (CS6x20 SMW x 6).
 To put away the parts used for packaging, use the screws that were installed during packaging.
Rubber feet
Metal sheet for packing
Stay 1