Mimaki Europe B.V.
Sign Graphics Products
Media feeding and take-up
• Media of up to 40kg can be used
• The take-up roll unit of CJV300 has a strong torque to feed media of 40kg
• Maximum diameter of up to 250mm
• The height of the take-up roll unit is 17cm, which is high
enough to roll up media of a diameter up to 250mm
• Prints one roll of media with high feeding accuracy
• The diameter of the taken-up media is measured by a sensor
• This keeps the tension of the media constant
Take-up roll switch
For manual operation
press the button to roll
up the media.
38
To Next Page
Loading...
