5-13
5
2
Automatic Maintenance
Function
To use this machine comfortably, you can set various
maintenances to be performed automatically.
Here, set performing intervals of various automatic
maintenances.
You can prevent troubles such as ink clogging by
performing automatic maintenance periodically (automatic
maintenance function).
For the auto maintenance functions, the following items
can be set:
Setting the Refreshing Intervals
The interval between each operation of ejecting a small
amount of ink from the nozzles to prevent nozzle clogging
is set.
1
Press the
(MENU)
key in LOCAL.
• MAINTENANCE MENU will be displayed.
2
Press , and then press the
key.
• “AUTO MAINTENANCE” will be selected.
3
Press the key.
• “REFRESH” will be selected.
4
Press to set the refreshing
interval, and then press the key.
• Set value : The set value will differ according to
the ink type being used.
5
Press the key several times
to end the setting.
Setting the Tube Wash Intervals
For setting the interval at which washing of the ink tubes
will be carried out, in order to prevent ink clogging due to
coagulation of ink inside the ink tubes.
1
Press the
(MENU)
key in LOCAL.
• MAINTENANCE MENU will be displayed.
2
Press twice, and then press the
key.
• “AUTO MAINTENANCE” will be selected.
3
Press , and then press the
key.
• “TUBE WASH” will be selected.
4
Press to set the tube washing
interval, and then press the key.
• Set value : The set value will differ according to
the ink type being used.
5
Press the key several times
to end the setting.
Setting the Cleaning Intervals and
Type
The cleaning type and the interval between each cleaning
operation are set.
1
Press the
(MENU)
key in LOCAL.
• MAINTENANCE MENU will be displayed.
2
Press , and then press the
key.
• “AUTO MAINTENANCE” will be selected.
3
Press the several times to select
“Interval” or “Type”, and then press the
key.
4
Press to select a set value, and
then press the key.
• Set value : The set value will differ according to
the ink type being used.
• Set value of type : SOFT/ NORMAL/ HARD
5
Press the key several times
to endthe setting.
• When you perform maintenance manually, after
manual maintenance is completed and when time
set with the automatic maintenance function has
passed, maintenance starts automatically.
Function name
Descriptions
REFRESH
The interval between each refreshing
operation is set.
CLEANING
(Interval)
The interval between each cleaning operation
is set.
CLEANING (
Type
) The cleaning type is set.
• If the “Check waste ink” warning message is
displayed, the operation set in the auto
maintenance function is not carried out. Perform
the operations of P.5-16 “Replace the waste ink
tank with another” if required.
• When the power switch on the front of the machine
is turned off, check the waste ink tank.
• In order to perform tube washing with the
Automatic Maintenance Function, the
maintenance washing liquid needs to be set. If the
maintenance washing liquid is not set, tube
washing operation will not be regularly conducted
and the passage could be clogged.
To Next Page
Loading...
