MIMAKI CJV300-130 - Page 68

3-14
Set the server
1
Press the
(MENU) (twice)
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press the
(<<)
key .
• “EVENT MAIL” will be selected.
3
Press 4 times, and then press the
key.
• “SERVER SETUP” will be selected.
4
Press the key.
• “SMTP ADDRESS” will be selected.
5
Press to set SMTP
Address, and then press the key.
• Press the jog key [][][][] to set SMTP
address.
• Input the SMTP address name.
6
Press , and then press the
key.
• “SMTP PORT No.” will be selected.
7
Press to set SMTP Port No., and
then press the key.
• Set the SMTP port number.
8
Press , and then press the
key.
• “SENDER ADDRESS” will be selected.
9
Press to set SENDER
ADDRESS, and then press the
key.
•Press [][][][] and set the e-mail address to
be used as the sender mail address.
• Set it with alphanumeric characters and symbols
within 64 characters.
10
Press , and then press the
key.
• “AUTHENTICATION” will be selected.
11
Press to set authentication
method, and then press the key.
• Set the authentication method of the SMTP
server.
• When you select [OFF], proceed to the Step 20.
12
Press , and then press the
key.
• “USER NAME” will be selected.
13
Press to set User
Name, and then press the key.
•Press [][][][] to set the user name to use
for the authentication.
• Set it with alphanumeric characters and symbols
within 30 characters.
14
Press , and then press the
key.
• “PASSWORD” will be selected.
15
Press to set Pass
Word, and then press the key.
•Press [][][][] to set the password to use for
the authentication.
• Set it with alphanumeric characters and symbols
within 15 characters.
• When you select [POP before SMTP] in the Step
11, set the items in the Step 16 to 19.
16
Press , and then press the
key.
• “POP3 ADDRESS” will be selected.
17
Press to set POP3
Address, and then press the key.
•Press [][][][] to set POP server.
• Input the POP server name.
18
Press , and then press the
key.
• “APOP” will be selected.
19
Press to set ON/ OFF, and then
press the key.
20
Press the key several times
to end the setting.
• Depending on your server, if you do not
set the e-mail address not supporting the
account, sending/ receiving e-mails may
be unavailable.
• On the password setting screen, you can
only check the value that you are currently
inputting.