Chapter 5 Using the XY Slitter
135
5.6 Printing RIP Data
The explanation here applies to MIMAKI RIP software (RasterLink).
• Slitting cannot be performed at the same time as "Print&Cut" or "Cut&Print".
1
Click (Quality).
• This selects a color profile for the media and ink set loaded in this machine.
• For more information, refer to the RasterLink reference guide. https://mimaki.com/
download/software.html
2
Print image data.
• "Starting Printing"(P. 135)
(1) Click (Execution) from the function icons on the right-hand side of the screen.
(2) Select "Immediate Print" or "RIP and Print", then click [Start].
Starting Printing
1
Send the RIP data from the PC.
• "Preparing RIP Data"(P. 83)
• When the message "Attention20A Driver Version" appears, install the latest Mimaki driver
available from: https://mimaki.com/download/inkjet.html
2
Start printing.
• Printing starts once RIP data is received.
0.0m
600x600 16p / Bi / Hi / Vd
PRINT
REMORT
Resolution
Number of passes
Scan direction (Uni: unidirectional, Bi: bidirectional)
Scan speed (Std: standard, Hi: high speed)
Dot type
VD: Variable dot
ND: Normal dot
Length of medium printed
• Print speeds may differ for the same image data, depending on the width of the medium
loaded, print origin position, and resolution.
• If an error occurs, the machine switches to LOCAL mode once printing is completed.
Further printing is not possible.
Pausing Printing
1
Press [LOCAL] while printing is in progress.
• Printing is paused.
• If data is being sent from a PC, data transmission is paused at the PC.
5
To Next Page
Loading...
