Chapter 7 Maintenance
180
5
Mount a new cap absorber.
• Insert the claws of the plate into the slit in the cap absorber.
• Make sure that the cap absorber does not come off.
6
Remove the maintenance liquid absorbent.
7
Wipe off maintenance liquid around the slider block.
8
Mount a new maintenance liquid absorber.
• Insert the maintenance liquid absorption into the protrusion firmly.
9
Check for floating or warped absorber.
10
Once replacement is complete, close the cover, then press the [ENTER] key.
Exhaust Fan Filter Replacement
Check the exhaust fan filter condition. Replace if very dirty.
To Next Page
Loading...
