MIMAKI CJV330-160 - Platen; Media Sensor; Power Supply Switch

Chapter 1 Before Use
29
Platen
The platen features a large number of holes used to secure the media under vacuum pressure. This also
features a cutting slot for cutting the media.
Cutting slot Cutting slot
[JV/TS] [CJV]
Media sensor
The media sensor detects the presence/absence of media. The sensor must be covered by the media to
detect the media width.
Media sensor
Power supply switch
l
Main power supply switch
This is located on the right-hand side of the product.
[JV/CJV] [TS]
Heater power supply switch
1