Chapter 1 Before Use
32
Display
REMOTE
TEST PRINT
CLEANING
MENU
LOW 1620mm
PRE PRINT POST
35°/40° 40°/40° OFF
SETUP 1
Connected cable type
Detected media width
Function name assigned to [FUNCTION] key
MENU mode <setting type number>
Head height
Heater temperature (actual temperature/
setting)
Orange: Heating to the set temperature
Green: Reaches the set temperature
Gray: Set to OFF
Ink status
MENU mode
Four menu modes are available.
Name Outline
LOCAL mode Used for test printing, maintenance, and settings
REMOTE mode Prints the print data received from a PC.
MENU mode Press the [MENU] on the LOCAL mode screen to switch to MENU
mode. This is used to set various functions.
NOT-READY mode Status before media is detected
Ink status
Ink pack status such as remaining ink levels and ink errors are indicated by icons.
Icon Outline
Displays remaining ink levels using a 9-stage icon.
Full 1/8 used 1/4 used 3/8 used 1/2 used 5/8 used 3/4 used 7/8 used
Very little ink remains. Prepare fresh ink.
* Indicates ink end for UISS (two ink bottles of the same color are fitted).
Printing is not possible. Displayed when ink is depleted or an ink error has occurred. "Ink
error"(P. 208)
Displayed when the ink has passed its expiration date. Replace with new ink or use up as
quickly as possible. Printing is possible. "Restrictions concerning the product"(P. 15)
To Next Page
Loading...
