Chapter 1 Before Use
46
2
Shake the ink eco-case slowly from left to right at least 20 times.
• Shake the bottle slowly from left to right to ensure that the ink moves inside, holding the ink pack
opening with a paper towel.
• When using an ink pack with ink remaining, hold a paper towel over the ink eco-case
opening and shake slowly with the ink eco-case tilted upright.
3
Remove the seal attached to the ink pack opening.
• Remove the seal completely. If any parts of the seal remain, ink may leak when the eco-
case is removed from the base.
4
Place the ink pack inside the ink eco-case.
• Push the ink pack connector into the eco-case slot. Ink may not be supplied if the connector is out
of position.
• Position the pack as indicated on the label on the eco-case.
5
Close the eco-case gently to avoid pinching the ink pack.
• Be careful to avoid catching your hands or fingers.
l
Mounting the ink
To Next Page
Loading...
