MIMAKI CJV330-160 - Using a Pen

Chapter 3 Cutting
96
3
Fix the lock nut by turning in the direction indicated by the arrow in the picture.
Using a Pen
Installing a Refill Cartridge for a Ballpoint Pen in the Pen Holder
The image quality can vary depending on the type of refill cartridge.
Recommended: SXR-5 (Mitsubishi Pencil Co., Ltd.)
1
Remove the cap from the pen holder.
• Turn in the direction indicated by the arrow in the picture.
Pen holder
2
Insert a refill cartridge into the pen holder.
• Insert the refill cartridge until it hits the pen holder.
Refill cartridge
3
Insert the spring into the refill cartridge.
Spring