38
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
8) Plot Option
Sort
Performs sort operation with minimized useless head movement, allowing efficient
cutting. Mimaki CF series cuts figures in order of size (from the smallest figure to
larger ones).
Sheet Feed
Before cutting, feed the sheet to confirm the performance whether the entire data can
be cut.
If fails to plot, an error is displayed on the plotter. Stop plotting, reset the sheet,
then restart plotting.
Auto Cut (see page 27)
When in use of Mimaki CG-FX series, the function is effective.
When performing continuous cutting on a roll sheet, cut off the sheet automatically
after completing the performance.
Click Set button to set the follwing information.
Max Cut Length + : Set the maximum length from the last line to the cutting point.
Detail Cutting : Check the box to cut a data at every line.
To Next Page
Loading...
