Mimaki Europe B.V.
Industrial Products
Solvent resistance - Dipping test
• Multiple LED-UV inks for a wide range of applications
• When printing on less adhesive media, UV ink tends to peel off
by the penetration of water or solvent from the print edge
31
LH-100 LUS-150
Water
× ○
Hot water (60℃)
× △
*1
Ethanol (100%)
○ ××
*2
Xylene (100%)
△ ××
*2
Evaluation standards：○：Attached, △： Peels off partly, ×：Takes some time to peel off, ××：Peels off immediately after dipping.
(It takes 3 minutes to peel off when dipping in ethanol and xylene.)
*1: Air bubbles get in/ 2: Ink film is attacked/ 3: Ink film become hard
To Next Page
Loading...
