MIMAKI JFX200-2513EX - Page 109

Chapter 3 Convenient Usage
3-41
2
Each time you press the [ENTER] key, subsequent details are displayed in order.
• The following information is displayed.
• Remaining amount of ink
***INK MMCCYYKK
99999999
REMAIN
• Error display (for ink error)
NON-ORIGINAL INK
MMCCYYKK
• Warning display (for warning)
WARNING
[MNT]
REPLACE WIPER
• Serial No.
SERIAL NO.
: ********
• Version
JFX200-2513EX V1.00
V2.20
MRL-III
• Main PCB Information
MAIN PCB EPL3B
• Nozzle recovery
Press the [MAINT.] key to check the details
NOZZLE RECOVERY : 1
[MNT]
CONFIRM
3
Press the [ENTER] key to return to LOCAL.
Stopping the circulation/agitation operation while power is off
When white ink is used in the machine, start up the machine periodically to perform the circulation/agitation
operation to prevent the ink from settling. (during operation, the remaining time is indicated at the bottom of
the display)
CIRCULATION
0 : 09 : 40
AGITATION
0 : 12 : 35
Circulating Agitating
If you want to cancel the circulation or agitation operation so as to use the machine, press the [END] key.
When you press the [END] key, a selection screen to continue/cancel the operations is displayed.
CIRCULATION
>CANCEL
CONTINUE<
AGITATION
>CANCEL
CONTINUE<
Circulating Agitating
• To continue the circulation/agitation operation: Press
(returns to the display during operations)
• To cancel the circulation/mixing operation: Press
(returns to the local screen after initializing operation)
3