Chapter 4 Maintenance
4-6
4
Press the [ENTER] key.
• Carriage moves onto the table.
5
Remove the wiper.
• Pull out the wiper by holding the protrusions at both the ends.
6
Clean the wiper and the bracket.
• Wipe off any ink on the wiper and the bracket using a clean stick soaked in washing liquid. Wipe it
off properly so that there is no residual washing liquid.
• Clean the wiper and the bracket until they look like the picture.
• After cleaning, make sure the wiper and bracket are aligned horizontally
To Next Page
Loading...
