MIMAKI JFX200-2513EX - Solving Persistent Nozzle Clogging Issues

Chapter 4 Maintenance
4-18
When Nozzle Clogging Cannot Be
Solved
If the nozzle clogging is not resolved even after head cleaning "Head Cleaning" (P. 2-15) is implemented,
execute the following functions.
HEAD FILLUP • Fill the head with ink.
Filling with ink from the sub tank to the head
NOZZLE WASH • Wash the head nozzle.
"Washing of head nozzle" (P. 4-19)
NOZZLE RECOVERY • If you cannot fix the nozzle clogging, print using an alternative nozzle.
"NOZZLE RECOVERY Function" (P. 4-25)
Filling with ink from the sub tank to the head
1
Select [HEAD FILLUP] from the [MAINTENANCE] menu.
(1) Press the [FUNCTION] key in LOCAL.
(2) Press to select [MAINTENANCE], and press the [ENTER] key.
(3) Press to select [HEAD FILLUP].
(4) Press the [ENTER] key.
2
Press the [ENTER] key.
SELECT SUBTANK
:CMYKYKMCClClWW
3
Press the [ENTER] key.
** MOVING NOW **
PLEASE WAIT
4
Press the [ENTER] key.
• The ink starts to be filled in the head.
**FILL UP**
PLEASE WAIT
• Once the filling is complete, the following screen is displayed.
HEAD FILLUP
>RETRY
COMPLETED<
5
Press to select "COMPLETED".
• When refilling, press and perform the operations from Step 2 onwards.
6
Press the [END] key several times to end the operation.