Chapter 2 Basic Usage
2-11
Test printing
Print the test pattern to make sure that there are no ink discharge problems such as clogged nozzle (blurred
print or missing nozzles).
Examples of Plotting Failure
Discharge failure of the head (head nozzle) due to dust is a typical example of plotting failure.
Periodically check the condition of the nozzle before output or during output to avoid using it in defective
state.
The condition of the nozzle can be checked by [TEST PRINT] of this machine.
"Test printing" (P. 2-11)
Deflection Nozzle clogging
SatelliteInk dropping
2
To Next Page
Loading...
