MIMAKI JFX200-2513EX - Page 82

Chapter 3 Convenient Usage
3-14
9
Press to select the scanning direction, and press the [ENTER] key.
• Available settings: Bi (bidirectional)/Uni (unidirectional)
UV LEVEL
: Bi
10
Press to select the printing pattern, and press the [ENTER] key.
• Available settings:
PATTERN 1, 2, and onwards/NO PRINT
• If you select "NO PRINT" then the UV lamp lights without printing anything, even if print data is
sent.
UV LEVEL
: PATTERN 1
11
Press to select the irradiation level, and press the [ENTER] key.
• Available settings:
Level 0 to 15 (the higher the number, the more is the irradiation intensity.)
UV LEVEL
LEVEL: 10
12
Press the [END] key several times to end the operation.