MIMAKI JFX200-2513EX - Page 84

Chapter 3 Convenient Usage
3-16
6
Press to select "AUTO" or "MANUAL".
• AUTO:
Settings are performed automatically according to the printing conditions.
• MANUAL:
You can adjust the settings manually.
MAPS 2
: MANUAL
• If the feed stripes and uniformity of density are not improved by AUTO settings, adjust using
MANUAL settings.
7
Press the [ENTER] key.
• If you have selected "AUTO" in Step 6, then proceed to Step 11.
• If you have selected "MANUAL" in Step 6, then proceed to Step 8.
COLOR >
PATTERN: 1
8
Press to set [COLOR].
• AUTO:
Patterns are set automatically depending on the printing conditions.
• PATTERN 1 to 5:
The pattern that you select is printed.
COLOR >
PATTERN: AUTO
9
Press the [ENTER] key.
• A screen for setting [SMOOTHING LV.] is displayed.
COLOR >
SMOOTHING LV.: AUTO
10
Press to set the [SMOOTHING LV.].
• AUTO:
Smoothing level is set automatically according to the printing conditions.
• 5 to 100%:
The effects of MAPS2 grow stronger when the value is increased and weaker when it is
decreased.
COLOR >
SMOOTHING LV.: 50%
11
Press the [END] key, and then press .
• A screen for setting [SPOT] is displayed.
SPOT >
PATTERN: AUTO
<