MIMAKI JFX200-2531 - Measuring the thickness of the media automatically

3-5
1
1
3
Convenient use
5
6
Registering the thickness of the media
Measuring the thickness of the media automatically
Thickness of media is automatically measured with the gap pin on the left of the carriage.
1
Set a media.
2
Press the key in the local.
3
Press to select the [HEAD HEIGHT].
4
Press the key.
5
Press to select the [THICKNESS CHECK].
6
Press the key.
• In preparation for the measuring, the Y-bar will move up to the top
position.
• The carriage will move to the printing area.
7
Press the key.
• The media thickness will be measured automatically.
• The measured thickness will be displayed.
• The carriage will move to the evacuation position and the screen
returns to the one displayed in Step 5.
8
Press the key several times to end the setting.
• Be sure to set a media on the printing area. If measured automatically without media, the
head can break.
• Difference of automatic measure is ±0.1mm.
FUNCT I ON
VIEW [ENT]
FUNCT I ON
HEAD HE I GHT [ ENT ]
HEAD HE I GHT
MEDIA THICKNESS[ENT]
HEAD HE I GHT
TH I CKNESS CHECK [ ENT ]
* * MOV I NG NOE * *
PLEASE WA I T
TH I CKNESS CHECK
CHECK START [ ENT ]
TH I CKNESS CHECK
**CHECING**
TH I CKNESS CHECK
3.0mm