MIMAKI JFX500-2131 - Page 102

When Nozzle Clogging Cannot Be Solved
4-20
Clear the set value
1
Select [NOZZLE RECOVERY] of the maintenance menu.
(1) Press the key in LOCAL.
(2) Press to select [MAINTENANCE] and press the key.
(3) Press to select [NOZZLE RECOVERY].
(4) Press the key.
2
Press to select [CLEAR] and press the
key.
3
Press to select the head (H1-2/ H3-4/ H5-6)
for which you reset nozzle recovery.
4
Press the key.
5
Press to select the Nozzle line that needs
reset the setting value and press the key.
6
Press the key.
7
Press the key several times to end the setting.
NOZ Z L E RECOVERY
:CLEAR
SELECT HEAD
:H1-2
SELECT HEAD
:H3-4
SELECT CLEAR NOZZLE
:H1-A
SELECT CLEAR NOZZLE
:H1-A
H1 -A CLEAR?
EXECUTE [ ENT ]