MIMAKI JFX500-2131 - Chapter 3 Extended Functions

This chapter
describes the operation procedures for using the machine more conveniently and each
setting procedure.
Changing origin .............................................3-2
Changing origin with JOG keys.................... 3-2
Changing origin with FUNCTION menu ....... 3-3
Registering the thickness of the media ......... 3-4
Register the thickness of the media
manually....................................................... 3-4
Adjust head gap with the or
keys ................................................. 3-4
Measuring the thickness of the media
automatically ................................................ 3-5
Registering Head gap value ..........................3-6
List of Functions ............................................3-7
Set the feeding amount of the Y bar ............. 3-8
Setting Feed Correction ............................... 3-8
Correct the ink drop position for bidirectional
printing ........................................................3-10
Setting Logical Seek ...................................3-12
Setting UV mode .........................................3-13
Adjusting the intensity set in RIP................ 3-13
Printing at the intensity set in the printer .... 3-14
Setting Work Change ..................................3-17
Setting Ionizer .............................................3-18
Perform setting to reduce stripes between
passes .........................................................3-19
What is the MAPS Function?......................3-19
Setting MAPS1 Function.............................3-20
Setting MAPS2 Function (4 color) ..............3-21
Setting MAPS2 Function
(4color + special color ink)..........................3-22
Setting Auto Cleaning .................................3-24
Setting nozzle face cleaning .......................3-25
Setting Ink Heater .......................................3-26
Other Settings .............................................3-27
Machine Settings .........................................3-28
Setting a AUTO Power-off ..........................3-28
Setting Time................................................3-29
Setting Units ...............................................3-30
Setting a KEY BUZZER..............................3-31
Setting a LANGUAGE.................................3-32
Initializing the Settings ................................3-33
Confirming Machine Information .................3-34
Check the using status of the machine....... 3-34
Check the machine version information......3-35
Displaying the Information of this machine .3-36
Chapter 3
Extended Functions