3-14
Printing at the intensity set in the printer
1
Press the key in LOCAL.
2
Press the key.
3
Press to select [UV MODE].
4
Press the key.
5
Press to select [PATTERN].
6
Press the key.
7
Press to select [MANUAL].
• To print at the intensity set in the printer, select [MANUAL].
8
Press the key.
9
Press to select [MANUAL].
• Set values : Pattern 1 to 7, NOPRINT
• The following indicates the recommended printing mode for each
irradiation pattern.
Ink set 4-colors 4-colors + white
Pattern 1
300x450HQ 300x450HQ (only color print)
Pattern 2
Not normally used
Not normally used (Irradiation is weakened
directly after ink is applied.)
Pattern 3
When the crack of ink occurs. When the crack of ink occurs.
Pattern 4
600x600 600x600 (only color print)
Pattern 5
600x900, 1200x1200 600x900, 1200x1200 (only color print)
Pattern 6
When contact with the media is poor When contact with the media is poor
Pattern 7
Not normally used
300x450HQ, 600x600, 600x900, 1200x1200
(color white overlapping print, white print)
NOPRINT
Only irradiation Only irradiation
To Next Page
Loading...
