3-18
Setting Ionizer
Set the operation if you have an optional ionizer equipped.
1
Press the key in LOCAL.
2
Press to select [SET UP].
3
Press the key.
4
Press to select [IONIZER].
5
Press the key.
6
Press to select a set value.
ON : During normal printing, the ionizer is on and removes static
electricity before and during printing. For reverse printing, it
removes static electricity before beginning the print. The
ionizer turns on while moving to [VIEW].
OFF : Static electricity is not removed.
7
Press the key.
8
Press the key several times to end the setting.
To Next Page
Loading...
