3-25
1
1
3
Convenient use
5
6
Setting nozzle face cleaning
The nozzle face of the head is automatically cleaned and any ink stuck to the nozzle face is removed before
starting and during printing.
1
Press the key in LOCAL.
2
Press to select [SET UP].
3
Press the key.
4
Press to select [INTERVAL WIPING].
5
Press the key.
6
Press to select the type of interval wiping.
• When you select interval wiping "PAGE", after set number of
printings has been completed, head nozzle cleaning is
automatically performed before the next printing starts.
• When you select "TIME" for periodic wiping, head nozzle cleaning
is automatically performed when the set time elapses during
printing.
• If you do not set interval wiping, first select “OFF” and then
proceed to the Step 9.
7
Press the key.
8
Press to set the wiping interval.
Setting value (PAGE) : 1 to 100 page
Setting value (TIME) : 3 to 50 min
9
Press the key.
To Next Page
Loading...
