Maintaining the Capping Station
4-7
1
1
1
4
Routine Maintenance
Washing the Ink Discharge Passage (DISWAY WASH)
Wash the ink discharge passage regularly to prevent the head nozzles from clogging due to ink coagulation
inside the passage.
1
Press the key in LOCAL.
2
Press to select [DISWAY WASH].
3
Press the key.
• The carriage moves onto the table.
4
Fill up the cap with cleaning solution for
maintenance, using a dropper.
• Fill the cap with the cleaning solution just before the
solution overflows from the cap.
5
Press the key.
• After the idle absorbing operation has been performed for 30
seconds, the screen returns to step2.
To Next Page
Loading...
