4-14
When Nozzle Clogging Cannot Be Solved
When nozzle clogging cannot be solved even after the head cleaning ( P.2-12) has been done, perform the
following three functions:
Fill up ink from the subtank to the head
1
Select [HEAD FILLUP] of the maintenance menu.
(1) Press the key in LOCAL.
(2) Press to select [MAINTENANCE] and press the key.
(3) Press to select [HEAD FILLUP].
(4) Press the key.
2
Press to select filling head.
Select head : by the keys.
Select whether to fill or not : by the keys.
3
Press the key.
• Begin operation to fill the head with ink.
• When filling is completed, the screen on the right is displayed.
4
Press to select “END”.
• If performing filling again, press , then perform from step 2 again.
5
Press the key several times to end the setting.
HEAD FILLUP
• Fills up the head with ink. ( P.4-14)
NOZZLE WASH
• Wash the head nozzle. ( P.4-15)
NOZZLE RECOVERY
• Alternative nozzles for printing, when nozzles missing can not be improved.
( P.4-17)
SELCT SUBTANK
12______
** FILL UP **
PLEASE WA I T
HEAD F I L LUP
END< >RETRY
To Next Page
Loading...
