Chapter 3 Settings (MPC)
102
Item Overview
Nozzle
recovery
operation
guide
Shows the nozzle recovery operation guide.
Daily
maintenance
Lists items for which daily maintenance should be performed.
Daily station
maintenance
Moves the carriage for cleaning around the station.
"Wiper Cleaning"(P. 114)
"Cap Rubber Cleaning"(P. 116)
"NCU Cleaning"(P. 117)
Head
maintenance
Moves the carriage to the maintenance space for cleaning in the print head area.
"Carriage Underside Cleaning"(P. 118)
Weekly
maintenance
Lists items for which weekly maintenance should be performed.
Weekly
station
maintenance
Moves the carriage for cleaning around the station. "Station Area Cleaning"(P. 116)
Cleaning the
ink discharge
path
Washes the suction pump tube (below the cap). "Waste Ink Draining Channel
Cleaning"(P. 120)
Other
maintenance
Lists maintenance items to inspect in the event of errors.
Sub-tank
maintenance
Used in case of sub-tank related errors
Replace
waste ink tank
Once ink levels in the waste ink tank reach the specified value, "0604 CHECK WASTE
BOTTLE" will appear in SYSTEM ALARM on the touch panel. Use this as a guide for
replacing the waste ink tank. "Waste Ink Tank Replacement"(P. 127)
Refill cooling
water
Once the specified value is reached, "0705 WATER LACK" will appear in SYSTEM
ALARM on the touch panel, and a buzzer will sound. Refill cooling water mixed with
antifreeze (1 part antifreeze to 2 parts water). "Refilling Cooling Water (Mixed With
Antifreeze)"(P. 128)
Adjust
positive
pressure
Adjusts pressure in case of pressure-related errors. "A pressure error
occurred."(P. 135)
Adjust
negative
pressure
Replace parts Displays replacement instructions for components requiring periodic replacement.
Replace wiper The machine maintains a count of the number of wiping cycles. Once the specified
value is reached, "0605 REPLACE WIPER" will appear in SYSTEM ALARM on the
touch panel. Replace dirty or warped wipers with new ones. "Wiper
Replacement"(P. 123)
Replace
flushing filter
The machine counts the amount of ink used in flushing. When a specified value is
reached, a message is displayed in SYSTEM ALARM on the touch panel
recommending replacement of the flushing filter. Use this a guide for replacement.
"Flushing Filter Replacement"(P. 125)
Replace NCU
absorbent
If the NCU ink pad must be replaced, "0657 Check NCU waste ink" will appear in
SYSTEM ALARM on the touch panel. Use this a guide for replacement. "NCU Ink
Pad Replacement"(P. 125)
To Next Page
Loading...
