MIMAKI JFX550-2513 - Carriage Filter Replacement

Chapter 4 Maintenance
124
5
Mount a new wiper.
Lug
6
Tap [Complete] > [Finish] once replacement is complete.
• The wiper usage count is reset.
Carriage Filter Replacement
Check the mist filters and replace if very dirty.
• Turn off the main power before performing maintenance tasks.
1
Remove the carriage filter covers.
• Remove the screws, then remove the filter covers.
• Filters are positioned on the left, right, and back of the carriage.
2
Install new filters.
3
Install the filter covers.
• Left and right of carriage: Fit the tabs on the bottom of the filter cover to the carriage cover, then
secure with screws.
• Back of carriage: Be careful to avoid dropping the filter cover.