Chapter 1 Before Use
51
• The O-ring fitted to the bottle cap may become detached when removing an ink bottle.
Refit the O-ring if it becomes detached.
3
Soak up any ink droplets on the bottle caps.
• Use a wipe filter to soak up ink droplets and prevent dripping.
4
Wipe off any ink on the bottle caps with paper towel.
• Check to confirm that there is no foreign matter, such as paper towel scraps or dust,
adhering to the bottle cap. Continuing to use it when it is dirty may result in foreign matter
blocking the ink channels, causing ink leakage.
5
Remove the bottle caps from the ink bottles.
• If the bottle caps are tight, remove using a tightening tool.
6
Remove the ink IC chip.
• When disposing of the product, contact an industrial waste disposal operator or dispose of
the product in accordance with the local laws and regulations.
1
To Next Page
Loading...
