MIMAKI JFX550-2513 - Entering Values Manually

Chapter 2 Printing
67
4
Tap [Yes].
• There may be a measurement error of about ±0.1 mm.
5
Tap [End].
6
Tap [X] in the upper right to close the dialog box.
Entering Values Manually
1
Check (or measure) the media thickness.
2
From MENU on the touch panel, tap [SETTING 2].
3
Tap [Media] > [Media thickness / Head gap].
• A dialog box appears.
4
Enter the media thickness
• Tap [-] / [+] to enter the value.
2