MIMAKI JFX550-2513 - Page 81

Chapter 2 Printing
81
2
Select the image data to print.
(1) Select [File] > [Open].
(2) Select the desired image data, then click [OK].
• If multiple printers are registered, select JFX550-2513, JFX600-2513 in "Printer name".
3
Select the image data imported.
• The image is displayed in the tab for JFX550-2513, JFX600-2513 selected in "Printer name".
4
Check the settings and alter as necessary.
• Specify the following settings by clicking the function icons shown on the right-hand side of the
screen:
(General Print): Specifies settings like enlargement/reduction and number of copies.
(Print Condition): Selects a color profile for the media and ink set loaded in the machine.
• For more information, refer to the RasterLink reference guide. https://mimaki.com/
download/software.html
5
Prepare a job (RIP data) from image data.
• Click (Execute) from the function icons on the right-hand side of the screen. Select "RIP and
Print", then click [Start].
6
Specify the destination and save the job (RIP data).
2