Chapter 2 Printing
84
Layer Layer Printing UV-LED Unit Position
Two layers
2nd layer:
1st layer:
Rear
2nd layer:
1st layer:
Front
2nd layer:
1st layer:
Front
2nd layer:
1st layer:
Rear
Starting Printing
1
From QUICK MENU on the touch panel, set [ Continuous print] to ON (○ in upper left of icon:
green).
• To save a job to the queue, set to OFF (○ in upper left of icon: red). After the job is saved
to the queue, turn on continuous printing.
2
Tap [JOB LIST] and select the job to print.
• A dialog box appears.
• Print speeds may differ for the same image data, depending on the width of the medium
loaded, print origin position, and resolution.
• Any errors will prevent further printing.
• The ink used in the machine is warmed before printing. Printing is disabled while the ink is
warmed.
• If you wish to delete a job, tap and hold (long tap) on the job and then tap [Delete]. Jobs
deleted any other way will remain listed in [JOB LIST].
To Next Page
Loading...
