Chapter 2 Printing
90
• Pages
*1
: The sequence of events from print preparation to print completion and carriage
return to the station is counted as one page. For this reason, for some multi-layer printing
jobs and 2.5D jobs, the number of pages is counted up for each layer printed.
• The number of pages for each job can be checked using "Layer (*/*)" on the MPC print
conditions screen.
Setting Nozzle Recovery
l
Enabling nozzle recovery
This prints using the normal nozzles to recover the clogged nozzles registered in "Automatically
Detecting and Registering Nozzle Clogging"(P. 88). Nozzle recovery can be used by enabling the setting in
MPC.
1
From MENU on the touch panel, tap [MAINTENANCE].
• The Maintenance menu is displayed.
2
Tap [Nozzle Recovery] > [Nozzle Recovery].
3
Tap [Mode] to turn it on, then tap [SET].
To Next Page
Loading...
