Chapter 3 Mchine setting
3-13
1
2
3
4
5
6
Setting the Display of Media Residual
Whether the screen displays the remaining amount of a
media is set.
1
Press the
(MENU)
(twice)
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press to select “MEDIA
REMAIN”, and press the key.
3
Press to select ON/OFF.
4
Press the key.
5
Press the key several times
to end the setting.
When using 600 cc cartridge
Requisite for the 600 cc cartridge
Mounting/removing 600 cc ink pack
Be sure to put the ink pack and the ink chip in the eco
case for setting the 600 cc cartridge on the ink station.
Precaution for using 600 cc cartridge
Be sure to put the ink pack and the ink chip in the eco
case for setting the 600 cc cartridge on the ink station.
Registering weight of eco case
Register the eco case weight on this machine to calculate
the remaining ink quantity from the weight of the 600 cc
cartridge.
When the media
remaining amount
display is turned to
"ON"
the remaining amount of a media is
displayed in Remote.
(However, when a leaf media is used,
the length of the media to be printed is
displayed.)
When the media
remaining amount
display is turned to
"OFF"
the remaining amount of a media is not
displayed in the Remote.
• The amount of a media that has been fed by the
printing and jog keys is reflected in the remaining
amount of a media.
• The length of a media (initial value of the
remaining amount) is entered when a roll media is
detected.( P.2-7)
• The setting configured here does not become
effective unless media detection is performed after
the setting has been complete.
• When set "ON" the media remaining display, you
can print the list of current media remaining
amount and the date. ( P.2-7)
Eco Case The 600 cc ink pack and the attached ink
chip are put in the eco case and used.
This is referred to as "600 cc cartridge" in
this manual.
600 cc Ink Pack
Ink Chip
*1
*1. Attached to the 600cc ink pack.
Scale
To calculate the remaining ink quantity,
input the weight of the eco case and the
600 cc cartridge into this machine. Use a
scale for weight measuring. (To manage
the accurate remaining ink quantity,
prepare the scale that can weigh in one
gram unit.)
• This machine cannot judge whether the 600 cc ink
pack is in the eco case or not.
When using the 600 cc cartridge, be sure to attach
the ink pack.
• Setting an eco case without ink chip on the
machine will break this machine. Be sure to attach
the ink chip to the eco case before use.
Register the weight of the eco case in the
following cases.
• For using the 600 cc cartridge for the first time
• When the case weight is changed by replacing the
eco case.
• The weight of each eco case slightly differs
respectively. To control accurate ink quantity, be
sure to register the weight of each eco case.
To Next Page
Loading...
