MIMAKI JV150-160 - Ink specifications

6-3
2
2
2
6
Chapter6 Appendix
Ink specifications
Recomended
Environment
Available temp. 20 °C to 30 °C
Humidity 35 to 65% Rh (No condensation)
Guaranteed temp. 20 °C to 25 °C
Temperature
change
± 10 °C / h or less
Dust Equivalent to normal office level
Highest operation
height
2000 m
Weight 170 kg 200 kg
Outside
dimensions
Width 2525mm 2775mm
Depth 700mm
Height 1392 mm
*1. When “MARGIN(RIGHT/LEFT)” in the Setup menu has been set to the minimum (-10 mm).
*2. It is outside diameter and weight after take-up media.
*3. Without deflection of the roll when it is retained at both ends.
*4. Operating Condition: Full load Measuring Method: According to clause 1.7.4.2 of Machinery Directive 2006/42/EC
Item BS3/ BS4 ink
Supply Dedicated sublimation dye ink cartridge
Color
Black ink cartridge
Cyan ink cartridge
Magenta ink cartridge
Yellow ink cartridge
Ink capacity 600cc per cartridge
Shelf life
The period is printed on the ink cartridge.
Within three months after opening the package even in the available period.
Storage tem-
perature
Storage
10 to 35°C (Average daily temperature)
Be sure to keep a vessel in the airtight condition.
Be sure to keep a vessel in a dry, well-ventilated, cool and dark location.
Transporta-
tion
0 to 40°C
Avoid the condition lower than -0 °C and higher than 40 °C.
• Do not disassemble ink cartridges and do not refill them with ink.
• Ink could freeze if kept in a cold place for an extended period.
• When aqueous ink is used, if the ink freezes, the quality is changed and the ink becomes unusable.
Store the ink in an environment that will not freeze the ink.
Item JV150-130 BS INK MODEL JV150-160 BS INK MODEL