EasyManua.ls Logo

MIMAKI JV300-130 A - Ink and Cartridge Errors

MIMAKI JV300-130 A
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter5 Troubleshooting
5-4
Ink cartridge warning appears
If an ink cartridge trouble is detected, the cartridge LED “red” is lit, and a warning message appears.
None of printing, cleaning and all the other operations that use ink is available.
In this case, replace the ink cartridge in question immediately.
Displaying the description of ink cartridge trouble
The contents of cartridge error are confirmable by the following operations.
1
Press the key in LOCAL.
2
Press the key.
When the ink leakage occurs
If the ink leakage occurs, unplug the power plug to turn off the main power switch, and contact our service office or
distributor.
Once cartridge trouble is displayed, do not leave the ink cartridge without replacing it for a long time; otherwise, the
machine will lose the nozzle clogging prevention function.
If nozzles are clogged, the machine must be repaired by MIMAKI's service engineer.

Table of Contents

Other manuals for MIMAKI JV300-130 A

Related product manuals