© 2014 MIMAKI ENGINEERING CO.,LTD. 5.1 P.4
5.1 Changing the Joints
R.1.1
1
2
3
4
5
6
7
Joint change procedure at the circulation path
Work procedures
1. Loosen the screw of cover fulcrum pin BKT which is at the
left side of front panel cover M.
2. Shift the cover fulcrum pin BKT to right, and remove the front
panel cover M.
3. Remove the front cover.
4. Remove the carriage cover.
Front panel cover M
Screw of Cover fulcrum pin BKT
INSTALLATION GUIDE > Ink Set > Changing the Joints
Model
JV300
Issue
2014.04.11
Revised
2014.05.08
F/W ver.
1.00
Remark
1.1
To Next Page
Loading...
