MIMAKI JV300-130 - Page 28

© 2014 MIMAKI ENGINEERING CO.,LTD. 5.1 P.5
5.1 Changing the Joints
R.1.1
1
2
3
4
5
6
7
5. Connect the circulation path of the white ink of the carriage
side.
[300 model]
Release
1-7
2-7
1-8
2-8
Fittings of the circulation path
 For the connection of the circulation route, refer
to the following.
•Dotted line in orange : Connect to 1-7 and 2-7.
•Solid line in orange : Connect to 1-8 and 2-8.
Dotted line in orange:
Connect to 1-7 and 2-7
Solid line in orange:
Connect to 1-8 and 2-8
White White
White White
 For the tube tag, refer to the following.
1-2
1-1
1-8
1-6
1-7
1-4
1-5
1-3
2-2
2-1
2-8
2-6
2-7
2-4
2-5
2-3
Not inserted
INSTALLATION GUIDE > Ink Set > Changing the Joints
Model
JV300
Issue
2014.04.11
Revised 2014.05.08 F/W ver.
1.00
Remark
1.1
Rev.